What does Light Four mean? (Generation 2)

Summary 

A Light 4 blinking light indicates your controller is being tied to your Rachio Account via our servers. The light will turn solid once your controller is activated, added to your account, and ready to use!

 [Gen2 Light Three]


Light Four Troubleshooting

  1. If you're re-attempting the WiFi setup process and Light Three is solid, the controller will need to be power cycled to clear the WiFi settings first.
  2. Assuming you enter the correct serial number and your controller still does not connect, please contact Rachio Support with your serial number (including the two-letter prefix) and Rachio username.
  3. iOS (Apple)
    If you have attempted to connect to the controller in your phone's WiFi settings--that is, you are connecting to your Rachio's WiFi directly--you will need to perform a Factory Reset on your controller (Option 2 in the article) and connect your controller through the Rachio app instead.
  4. Android
    WiFi setup on Android devices requires the correct input of both your WiFi password and your controller's serial number, to complete this step. If either are incorrect, the process will fail, and you will need to try again.
Was this article helpful?
3 out of 28 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.